Toyota 86/FR-S Fog Light Panel Delete Kit (PAIR) (1st Gen)

A fog light panel delete for the Toyota 86 and Scion FR-S (2012–2020) - built for track days and drift days, where a clean, functional nose matters more than driving lights.

Blanking off the fog light opening is cleaner looking and aerodynamically versus running the factory driving light setup.

This delete kit uses the OEM mounting holes so no drilling required. They can be fitted as-is, or sealed to the bumper with automotive sealant for a more permanent finish.

Stainless hardware is supplied along with thread locker, so bolts won't work loose on track - it's worth knowing that thread-locked bolts will be harder to remove later, with a high risk of damage to the part.

3D printed in ASA, sold as a pair (LH+RH).

Not compatible with the Subaru BRZ — its bumper bar differs around the fog light area.

For the side marker delete, see the Bolt-In Side Marker Delete Kit, which does fit the BRZ.

For motorsport/off-road use only.

FAQ block:

• What does this fit? Toyota 86 and Scion FR-S, 2012–2020 (first-generation) - not the Subaru BRZ, whose bumper bar differs around the fog light opening.
• Does this affect aero? Yes - this delete kit offers a cleaner face for air flow vs the fog light opening. It is a small gain, but never the less an aero improvement over the factory driving light setup.
• How does it mount? Into the OEM fog light mounting holes — no drilling needed. Can be fitted as-is or sealed to the bumper with automotive sealant.
• Is thread locker included? Yes, supplied with the hardware so bolts won't come loose on track — worth knowing thread-locked bolts will be harder to remove later, with a high risk of damage to the part.
• Can I buy just one side? Yes - sold as a pair by default, but a single side is available on request.
• What's it made from? ASA.
• What's the lead time? Made to order - expect 1–2 weeks, depending on current order backlog.